ANSWER: Firstly, just to clarify the shine on granite countertops or any stone will not “apply”. There is no “coating” and it doesn’t come from a product being applied to the surface. To improve the shine on your kitchen worktop, I suggest avoiding using dish soap or any type of soap to clean the surface when you do this.

Similarly, one may wonder, like you get the shine back on granite ?

To give your granite a shine back, put a little cooking oil on a soft cleaning cloth and wipe over the countertop. Gently buff it. This makes the counter somewhat stain-resistant and gives it a glossy sheen. Even if you know how to properly clean countertops, your granite still needs to be resealed regularly.

How else can I make my granite shine naturally?

Pour the rubbing alcohol into a 16 oz spray bottle. Add a few drops of dish soap, then fill the rest of the bottle with water. Screw the cap on your spray bottle and shake a few times to mix. Spray the mixture onto your countertops and use a clean microfiber cloth to clean and dry buff.

Considering this, does sealing granite make it shiny?

ANSWER : A sealer will not polish or shine the granite. Conventional impregnating agents soak into the stone and do not affect the color or surface finish, so you can rule out the use of a granite sealer. Polishing granite and marble (or polishing stone to a mirror finish) is done on large machines with intense friction.

How do I get my countertops shiny again?


  1. Clean the surface with soapy water and an ammonia-based detergent (e.g. Softscrub, avoiding detergents that leave residue.)
  2. For added shine, clean with an abrasive household cleaner such as Ajax or Apply comet and gently with a sponge.
  3. Do this once a month to maintain the original shine level.

Can I polish my granite worktop?

Use a store-bought polish. Purchase a granite polishing product to use on your countertop. Make sure your product is suitable for granite as some stone polishes are too acidic or abrasive for granite. Then use a clean, non-abrasive cloth to buff your countertop using broad, circular motions.

How do you polish granite after cutting?


  1. A wet tile saw must be rented or purchased to cut granite tile.
  2. Round the edge of the tile by running the grinder over the top edge of the tile until it is round. Polish with successively higher grit pads. Use wet-dry polishing pads wet to keep dust out.

What happens when you polish granite?

If you use a general polish, which also contains a lot of acid, can permanently damage your countertops. In fact, any polish or cleaner that contains lemon, vinegar, lime, ammonia, or bleach can damage the granite finish and result in stains and other signs of damage. Granite polishes come in both wet and dry versions.

Why is my granite countertop cloudy?

ANSWER: Hmmmm. “White cloudy patches” are usually a sign of etching caused by contact with acidic substances on calcite-based stones such as marble, travertine, and limestone, but not on granite. This can be the etching. To solve this problem, however, you must remove everything that is on the surface.

Can you ruin granite countertops?

Heat damage. Granite is very heat resistant, but worktops can be damaged by hot pots and pans. Repeatedly placing hot dishes straight from the oven on the countertop can leave black marks on the surface or possibly cause thermal shock and cracks.

What is the best granite cleaner?

Top 10 Best Granite Cleaners 2020 – Reviews

  • 10StoneTech Oil Stain Remover, Cleaner for Natural Stone.
  • 9Black Diamond Stoneworks Ultimate Grout Cleaner.
  • 8StoneTech Oil Stain Remover.
  • 7Supreme Surface Granite and Quartz Cleaner, Polish and Sealer.
  • 6Granite Plus!
  • 5Weiman Granite Cleaner and Polish.
  • 4Granite Gold Daily cleaner.

Should you seal or polish granite first?

Granite can only be polished over a heavy sealer. If the water seeps through and leaves dark spots or rings within 30 minutes, the water is penetrating the granite, so it should be sealed with a stone solid granite sealer before polishing.

What not to apply to a countertop made of granite?

DO NOT: Use harsh or abrasive cleaners and sponges.. Windex; acidic cleaning agents such as vinegar, lemon, lime; or anything with ammonia or bleach should be avoided. Frequent use of these chemicals will dull and weaken the seal over time.

How do I clean a cloudy granite countertop?

Granite can safely be cleaned with mild dish soap and water, but this can leave a soap film that dulls the appearance of the stone. Even the water from the sponge or towel you use can leave haze on your countertops.

What is the best homemade granite cleaner?

Homemade Natural Granite Cleaner

  • 1/4 cup isopropyl alcohol (aka rubbing alcohol or denatured alcohol)
  • 3-5 drops liquid castile soap (or any dish soap)
  • 5-10 drops essential oil (optional)
  • 1 1/2 cups distilled water (distilled is best, but filtered tap water is good for short-term storage)

You can put hot pans on a granite countertop?

Avoid placing hot pans on your countertop. Again, granite can handle the heat; it is, after all, an igneous rock. Brief encounters with a hot pot will not harm your countertops. However, excessive heat can weaken the seals.

Can discolored granite be repaired?

A Homemade Treatment for Granite Discoloration. For oil stains, you can Use ammonia on a clean rag and gently rub it into the stains to remove. A hydrogen peroxide solution is the perfect remedy for marks and ink stains. While water stains and rings can easily be removed by rubbing with a wool steel!

Can you use car wax on granite?

GRANITE AND MARBLE. Apply a coat of Car Wax to granite and marble countertops to even out fine scratches and restore the glossy finish and shine. Turtle Super Hard Shell Paste Wax is also a good choice, just know that you need to clean the surface before applying the car wax.

What is the best granite cleaner and polisher?

Our top 7 best granite cleaners

  • Granite Gold Clean & Shine granite cleaner – as good as it gets.
  • StoneTech Revitalizer Cleaner and protector for natural stone countertops.
  • Weiman Granite & Stone Cleaner.
  • Sprayway Granite and Marble Cleaner.
  • Method Daily Granite Cleaner.

How to get I want my granite countertops to shine again?

Method 1 Cleaning and Polishing the Countertops

  1. Mix warm water and mild soap together to make a granite cleaner.
  2. Use the soapy water to clean the countertop.
  3. Dry the countertop with a microfiber cloth.
  4. Make your own polish with baking soda for an easy To remedy this.
  5. Purchase a retail granite polish for the best shine.

What can I use to polish granite? e?

Granite Polishing Powder: Also known as stone polish, powder provides a quick and easy way to give granite a fresh shine while removing minor scratches and stains. If using dry, choose a buff polishing pad to apply the polish to the surface of the granite in an even, circular pattern.

Are all granite countertops shiny?

ANSWER: First, just to show off the shine on granite countertops or stone, it doesn’t “apply”. There is no “coating” and it doesn’t come from a product being applied to the surface. The shine or “polish” comes from grinding and polishing with special abrasives and huge machines in the factory.