If you’re trying to fire a pneumatic nail gun or stapler but only hear air escaping when you pull the trigger, chances are your tool’s “O-ring” isn’t sealing properly. Simply clamp the “O-ring” onto the ignition valve and grease it. This should solve the problem and help your air tool run properly.

Then you may also ask, why isn’t my nail gun firing nails?

If a nail gets caught in the gun or hitting an object and distracting, it causes a jam and the nail gun doesn’t shoot nails. If you find that your nail gun is not shooting nails, the most likely reason is that the instrument is jammed. Therefore, learning how to quickly and properly unclamp a nail gun is necessary.

Additionally, what causes a nail gun to double fire?

The root cause of double kisses is when the The nailer‘s pressure foot safety device is first loosened and then reattached.

In this context, how do you get a nail out of a nailing device?

Not every model has a lever, i.e. if there is no lever , open the magazine on the nailer. Most guns have a latch mechanism on the nose that allows the magazine to be slid open. If it’s stuck, use a claw hammer or pliers to gently pry it open, then slide the magazine open.

Why won’t my Paslode nailer fire?

The nail die Weapon does not fire or fires intermittently.

Misfires are the most common repairs we perform. Possible causes of a Paslode nail gun not firing include: A nail jam is preventing the nails from moving forward. The gas fuel cell is empty, out of date, or not properly attached.

How do you loosen a Ridgid nail gun?


  1. Disconnect the tool from from the air supply.
  2. Remove fasteners from the tool.
  3. Insert a #2 Phillips screwdriver into the drive mechanism.
  4. Lightly tap the screwdriver with a Hammer.
  5. Remove the bent nail, using needle nose pliers if necessary.
  6. Reconnect the tool to the air supply.

How to fix a jammed nail gun?

How to loosen the barrel of a nail gun

  1. Step 1: Turn off the power source. First, make sure you turn off the weapon.
  2. Step 2: Open. Open the barrel and locate the release lever.
  3. Step 3: Remove stuck nails.
  4. Step 4: Organize and refill.
  5. Step 5: Close Power up and restore power source.

Can you use 16 gauge nails in an 18 gauge nailer?

Same as 15 gauge nailers Most 16 gauge nailer guns will shoot nails up to 2-1/2 inches. You’ll pay about the same for a brand name 16 gauge nailer as you would for a 15 gauge pistol. 18 gauge nailer. If you are planning to just buy a trim nailer, this is the right size.

How does a nailer work?

How do pneumatic nail guns work? The most commonly used nail gun is the pneumatic nailer. This pressure is directed into the barrel of the nail gun and released when the trigger is pulled, the pressure across the tool’s internal piston propelling the blade forward, firing the nail into wood at an incredibly high rate.

What Type of oil do you use for a nail gun?

Only use lubricating oil specifically made for pneumatic tools, such as B. Senco Pneumatic Tool Oil or Paslode Lubricating Oil.

How do you solve jams? a brad nailer?

How to release a nail gun

  1. Turn off the power source. To do this, unplug the power cord of your nail gun from the power outlet.
  2. Open the barrel of the nail gun. Once you’ve done that, you can look for the release lever.
  3. Remove the clamp nail.
  4. Restock your nail device.
  5. Reassemble your nail gun .

Why does my Paslode shoot 2 nails?

Re: Paslode Framing Gun shoots 2 nails. What about that What causes the gun to fire two nails at once is that the driver hits the second nail instead of the first and drives both in at the same time. The head of the second nail catches the first and drives it in.

How does a pneumatic tacker work?

A pneumatic tacker is a tool commonly used in construction. It resembles a gun with a trigger and cartridge. The weapon is operated with compressed air. It is used to drive staples into a work surface.

How does a pneumatic nailer work?

The typical pneumatic nail gun uses a piston with a long shaft attached to it called a driver. When the nailer‘s trigger is pulled, the valve opens, forcing air into the cylinder and making the pressure above the piston greater than below. This drives the plunger down and drives the nail in.

Why won’t my Dewalt nailer fire?

Clear any jams in your Dewalt nailer. Remove the battery and magazine, making sure no fasteners are blocking the mechanism. If you see a stuck fastener, remove it and manually slide the driver blade back up. Reinstall the battery and magazine.