While most people like to have 1/8 or 1/4 inch lines, 1/2 inch and even up to 1 inch are fine too. You can keep your lines consistent by using tape to make sure they’re straight on your installation.

What is the best grout for showers?

In most cases, if your main goal is to match the color of your tile shower, the best grout for your shower is white. It works perfectly with grout that matches the colors of the tiles. However, if you’re looking for a color that doesn’t look too close to your main color, you should choose the red color.

What size notched trowel for 12×24 wall tile?

This size notched trowel allows the most room to work with in a typical work area. However, our larger size trowels (including T12 and T20 trowels) work well if you get out your tiles before cutting them to fit and are large enough to cover a piece you have laid down.

What size tile should I use in my shower?

You can install either a wall tile or laminate floor in a shower area of any size. The larger the room, the more complicated it is to lay the tiles correctly. If the shower is over 3 square meters, you can install floor tiles on a shower floor with a laminate or composite material (or even solid tiles).

Should tile Run same direction as hardwood?

Running the tile the same direction and making sure the floor under your bathroom or kitchen is also installed with the same direction is the key. If you have a kitchen or bathroom next to your other wall, but you don’t have to match it, don’t worry. You can tile on different sides and leave the wall for kitchen backsplash and side walls.

Can you tile without spacers?

Tilework without spacers is a project that most beginners can handle, but requires a careful layout. You can use the grid method (see this guide) or a drywall template, or lay out the tile directly on sheet rock and put a thin bead of caulk on top of the sheet rock to serve as a drywall backing.

Can you lay tile without grout lines?

This depends on the tile used. Some tiles have adhesive. Others require mortar or adhesive to adhere to another type of tile or substrate. Laying these tiles without grout lines will take time and effort.

What is the thinnest grout line for tile?

Thin grout lines are ideal for covering small gaps between tiles or for applying grout to the edge of tiles to protect them from moisture. Thin grout lines also work well for smaller projects like bathroom tile. It is better to apply thinner grout lines to tile than thicker grout lines because grout lines are easily scratched or worn out.

What is the smallest gap between tiles?

For a good look and appearance, the best gap between tiles and your countertop should be approximately 1/8″. However, it is not necessarily the best approach when installing tiles. It can create a gap on the top.

Also know, how big should grout lines be for 12×24 tile?

For standard kitchen tiles – most commonly 8″x10″ or 10″x10″ tile or smaller (the latter two sizes being the most common) – the typical grout size for a 1″ base should be no more than 2-3/8″ wide.

How long should I leave tile spacers in?

Place your tiles on the tile spacers every time you lay them to minimize settling and achieve a professional and attractive appearance. It is normal to see a noticeable difference during the first week of installation.

What can I use instead of tile spacers?

To save cash and avoid purchasing expensive tile spacers, you can use a metal can to keep the tiles aligned. Simply cut a slit in the top, place the can over a joint, and screw in until flush with the surface. Then just add a thin layer of mortar and press the tile down into the mortar to a thickness of about an inch.

In respect to this, how wide should grout lines be in shower?

Generally, you should not have to run grout in more than 1/2″ around the circumference of the shower. However, to maintain a good finish, it is possible to tile inside the corners of a shower enclosure or other irregular shape, by spreading grout up to 1/3″ into the corner and filling the rest with tiling.

How do you tile wall spacers?

Wall spacers are made from high quality, high density, moisture proof gypsum board with the manufacturer’s logo visible on both sides. You can get them in different thicknesses. They attach to the drywall with self-adhesive double-sided tapes, called wall spacers tape.

Are leave in tile spacers good?

Tile spacers are not recommended – although they come in various designs and sizes. They do not remove stains or grout from the tile, but instead allow grout between the tiles. Without the spacers, they would rub against each other.

Also Know, what size tile spacers should I use?


The most common size choice is to allow for the amount of material needed for the installation. So, if you’re installing a standard single glazed system, choose 1″ spacers for the top row, and 2″ spacers on the second row. Note The spacing of the tiles.

What size spacers should I use for 12×12 tiles?

8-foot lengths of 4-inch or 8-inch vinyl floorboard with a center-to-center spacing of 2 inches should do the job just fine for tiling a 12×12 (12 tile) hardwood floor.

What type of grout should be used in a shower?

Use either grout (concrete) or grout (mortar). It is commonly recommended to use grout on both the floor and the shower wall. The most popular kind of grout is cement (mortar, concrete, grout, brick mortar, or joint mortar). Mixing it is really simple.

Should you tile the walls or the floor of a shower first?

Do you start in a shower or tub wall? In most cases, you should first tile the wall – although tiling the floor can also serve similar functions. Tiling just one or the other, or in some cases both, provides an attractive appearance and a safer finish.

What is the normal grout width for subway tile?

In standard construction, subway tile is 5/8 inches wide and can be installed in 4-foot width.