Aluminum trim coil is a versatile product used to weatherproof and enhance exterior trim. Custom connection profiles can be formed on site to cover any substrate shape with a portable brake. The Appleton Building Products trim spool is color coordinated with the Appleton Building Products aluminum soffit system.

What do you use the trim spool for considering this?

The aluminum trim spool has multiple uses. The most common use for trim coils is to cover fascia boards, exterior window trim, flashing for roof and decks, or exposed wood on a structure exposed to the weather.

Additionally, what is Window Trim Coil?

Trim Coil is a thin sheet of aluminum or vinyl. Trim Coil is cut and bent on site and installed directly over your existing trim.

So how much does a roll of Trim Coil cost?

This Quick Roof white aluminum tape works well. It was easy to roll out and cut to desired length. I was able to cover the seams of the zip bathroom vent easily and quickly. Only 10 left in stock (more on the way). Top selected products and reviews.

List Price: $114.89
Price: 111, 15 $

How to use a trim spool?

Installation guidelines

Attaching the trim spool is like hanging a covering over a structural part that does not laminate a skin-tight surface. Allow for irregularities in the wood, as your metal siding shapes will be straighter than the wood pieces you’re covering. Aluminum expands and contracts as the temperature drops.

How much does it cost to wrap a window in aluminium?

Cost of aluminum window film. The cost of an aluminum window film is $1 to $2 per linear foot.

How much is a box of vinyl siding?

Vinyl siding costs between $3.50 and $7.50 Dollars per installed square foot for an average 1,500 square foot home with installation. In other words, the total cost is $5,250 to $11,250 for a Cape style home or shared ranch.

What type of wood should I use for the siding?

Wood paneling

  • Douglas fir. Doug Fir is one of the most commonly used exterior wood siding materials.
  • Redwood. Redwood makes great wood siding.
  • Western Red Cedar. Cedar rivals redwood for weather and insect repellents.
  • Primed trim.
  • Specialty wood paneling products.

How to cut a spiral hem?

Use tin snips to cut aluminum coils.

  1. Cut the coil material to length.
  2. Mark the depth of the hem on the coil material.
  3. Place the coil material with the hem protruding into the brake from the Throat.
  4. Bend the coil material past 90 degrees to begin seaming.
  5. Remove the work piece from the brake.

Can you bend vinyl sheet?

Galvanized sheet is too stiff to bend this way, but vinyl coil sheet can work, although a blind rivet or two may be needed to keep it from loosening Shape. I figured out the bending pattern by folding a piece of paper, which is a great trick for modeling any kind of flashing detail.

How do you bend PVC trimming coils?

Align marks evenly with the bending mechanism along the edge of the spool brake. Apply the brake and lift the handle to make the bend. The metal may need to be twisted and turned to make each bend in the pattern. Lift the handle fully to make a 90 degree bend.

What is a PVC trimming spool?

Product Overview. The Trim coil offers a nice maintenance. free trim that stands up to nature’s harshest elements. Offers a naturally textured wood grain. The product is easy to cut and install. Lays flat, cuts cleanly and is easy to install. The thermoplastic PVC coating provides a natural wood grain.

Can you put window trim over the side trim?

Stephen, I’ve always bumped the trim against the window frame, thread the trim over caulked the trim and then the edge that seals the gaps. This provides the best seal in my opinion. Cut a rabbet in the trim piece and your side panel will tuck behind the panel and you’ll also get a nice match to the window.

Can aluminum be bent back?

If your aluminum object is to is thick, you may not be able to straighten it. Aluminum is very malleable, making it easy to work with, but also easy to accidentally bend. If you accidentally bend a piece of aluminum, don’t assume it’s ruined and throw it away.

How do you replace rotten trim in a house?

Remove the rotten molding boards with crowbar and hammer. Slide the prybar between the siding and house siding and lift until the nails loosen enough to be removed with a hammer. Remove all trim pieces, even if just the bottom is rotten, instead of trying to connect a new piece to the old one.

How do you bend aluminum trim?

  1. Step 1: Purchase a brake tool. A brake tool is a device used to bend aluminum and other metals.
  2. Step 2: Make cuts in the aluminum. Align the aluminum piece with the combination square in a straight edge and measure out about 2.5 cm.
  3. Step 3: Bend the aluminum.
  4. Step 4: Bend the bezel to match guttering.

How do you hang the fascia?

Start installing the aluminum fascia in the middle of each length by folding them up push up the soffit panels to the lower end. Nail it, then work your way in both directions, hammering in nails placed about 1 inch from the top and bottom every 16 inches. Overlap the joints 1 to 2 inches.