Compare all specifications


WeatherShield WeatherShield
5/4 inch. x 6″ x 10′ Premium Pressure Treated Lumber 5/4″ x 6″ x 16′ Standard Pressure Treated Lumber 5/4″ x 6″ x 16′ Premium Pressure Treated Lumber
$6.77 $9.37 $13.27
(45) (37) (24)
Show details Details above View Details

Considering how wide are decking boards?

Width: Six inch wide boards are ideal in most cases. Four-inch-wide material takes longer to attach, creates more gaps, and requires many more fasteners—but you can use it. 8″ wide boards are more prone to cracking and denting due to their greater width; Avoid using them.

Second, how wide is a 5-4 decking board? Lumber sizes are usually given in “nominal” measurements. Nominal dimensions are the size of a board before it has been planed smooth (planed) on all 4 sides. Actual measurements are final size. decking boards.

Nominal size Actual size
5/4 × 6 1 ” × 5-1/2″
6/4 × 6 1-5/16″ × 5-1/2″

What size decking board is used here?

Wood decking is generally available in 2×6 and 5/4 x 6 profiles. 5/4 x 6 is manufactured specifically for decking and is milled with radius edge or bullnose. 2×6 is thicker and stronger, but also more expensive. The spacing between decking boards performs several important functions.

How wide is a 2×8 pressure treated board?

Softwood lumber sizes (pine, spruce, fir)
Nominal dimensions Actual dimensions in inches Dimensions in milliliters
2 x 6 1 1/2 x 5 1/2 38 x 140
2 x 8 1 1/2 x 7 1/4 38 x 184
2 x 10 1 1/2 x 9 1/4 38 x 235

Should you countersink deck screws?

If you are face driving deck screws, it is acceptable to countersink them yourself. Some decking screws even have a small cutter head built into the screw to make countersinking easier.

Can you use untreated wood for a deck?

Yes, you can use unfinished pine outdoors , but you shouldn’t make it your first choice. Pressure treated pine will withstand the elements much better. This is due to chemical preservatives. However, treated pine can be a great solution for other outdoor projects, including decking or even fencing.

Should you space decking?

Leave gaps between decking to accommodate a to achieve drainage. “When fixing the decking boards, it is important to leave enough space between the boards to allow water to drain. The goal is to have a gap of about 1/8 inch (diameter of an 8d nail) between the planks after the deck has dried to its equilibrium moisture content.

What are decking boards called?

Balusters – The vertical boards that attach to the handrails. Sometimes called spindles. Beam – The horizontal boards attached to the post to support the weight. Joists – Typically 2 x 8 boards installed vertically and between joists to distribute weight and hold decking.

How wide is a 4×4 post?

The Lumber industry defines standard wood post sizes as 4×4 or 6×6. The standard 4×4’s external dimensions are 3-1/2″ x 3-1/2″, and the standard 6×6’s external dimensions are 5-1/2″ x 5-1/2″.

What size wood should I use for decking frames?

Wood is the common material for decking. The wood should be pressure treated to prevent decay and decay. Some of the most commonly used woods are cedar, redwood, fir, and pine. There are decks that use concrete posts for support, but wooden posts are the most common.

Can I use 1×6 for decking?

For kiln dried decking, set the spacing between planks to 3/ 16″ solid. for 4″ and 1/4″ for 6″ decking. In general, 1×4 and 1×6 joist decking can be installed on 16-inch centers. 5/4×4 and 5/4×6 decking can be installed with joists on 24 inch centers. When installing at an angle, joist spacing should be 12 inches.

Can you use 2×10 for decking?

Pine is the common compressed wood. But pine, especially southern yellow pine, can warp quite a bit. The larger the annual rings, the more unstable the wood. A 2×10 decking board that must lie flat and never buckle or warp begs her to do something that totally misses her character.

How do you measure decking?

To find this, multiply the width in feet of the floorboard by the length in feet. You can use our feet and inches calculator to convert plank width in inches to feet. To find the number of boards you need, divide the total area of the deck by the area of the board, e.g. B. total ft 2 / board ft 2 .

Can I use regular wood for a deck?

Both pine and regular “whitewood” wood work well for decking. Some pine is almost as resistant to rot as cedar, and both options are achingly no good. When it comes to cost, there are few cheaper options.

What is the actual size of the lumber?

Dimensions of the lumber

Nominal Actual Actual – Metric
2″ x 4″ 1-1/ 2″ x 3-1/2″ 38 x 89 mm
2″ x 6″ 1-1/ 2″ x 5-1/2″ 38 x 140 mm
2″ x 8″ 1-1/ 2″ x 7-1/4″ 38 x 184 mm
2″ x 10″ 1-1/ 2″ x 9-1/4″ 38 x 235 mm

What is the widest piece of wood?

Lumber that is 5 inches or thicker with a width that is more than 2 inches larger than the thickness. Rated as Select Structural, 1 or 2, with Select Structural being the strongest. Construction.

Nominal width Somewhere in broad terms Unhealthy or loose knots and holes
2″ 3/4″ 5/8″
3″ 1 – 1/4″ 3/4″
4″ 1-1/2″ 1″

How wide is treated decking?

x 6 inches x 16 feet. Pressure-treated decking is ideal for above-ground projects where wood is exposed to the elements.

What is the most durable decking material?

The most popular plastic decking material is polyvinyl chloride (PVC). ), although there are also versions made of polyethylene. Like composite decking, plastic is durable and easy to maintain and requires regular cleaning with a garden hose or bucket and mop.

What are standard plank sizes?

Common lumber sizes

Dimensional Lumber: Nominal Size vs Actual Size
Two by four or 2 x 4 1 1/2 in x 3 1/2 in
Two-by-Six or 2 x 6 1 1/ 2 in x 5 1/ 2 in
Two-by-Eight or 2 x 8 1 1/2 in x 7 1/4 in
Two-by-Ten or 2 x 10 1 1/2 in x 9 1/4 in

Can I use 2×6 for decking?

2×6 joists should only be used on ground level decks that do not have any guards. Most decking is not strong enough to support spans greater than 16 inches. Some contractors reduce joist spacing to 12 inches on center to strengthen the decking frame or increase maximum allowable joist spans.

How long do decking boards last? ?

Ordinary Maintenance. On average, a pressure treated pine deck will last 15 to 20 years before being subjected to the accumulated stress of direct sunlight, rain, salt, sea breezes, insect infestation and repeated cycles of thermal expansion and contraction.