Menards is proud to deliver the largest selection of hardwoods for your home. Menards offers the widest selection of hardwoods in our stores nationwide, so no matter where you are, we can help you find the perfect piece of hardwood to complete your project.

How wide are wood deck boards?

Our standard wooden deck boards are 1 5/16th inches thick. They are commonly referred to as 1-inch deck boards. However, some manufacturers manufacture decks with 1 ⅜-inch boards available.

How many deck boards do I need?

A 24″ deck is a 2-3/4 inch thick board with a top coat of polychlorinated rubber (plastic or PVC). A common width for this type of decking is 3-1/2″ wide. The most common board width used on decks in today’s homes is 2-1/2″. A 5/8″ deck needs a 22 3/8″ deck and a 3/4″ deck needs a 36 3/4″ deck. The minimum length of a deck is 10 feet, and the average deck is approximately 12-15 inches thick.

How much is treated pine decking?

Pine is relatively inexpensive to buy and install. You can purchase treated pine decking panels for $6.45 to $14.99 per sq ft!

How late is Menards lumber yard open?

All Menards locations are open 365 days a year, seven days a week through close.

Does Home Depot cut wood for free?

No, a home project such as a table or bookshelf does not qualify under the program. You must purchase the product at Home Depot. However, I can confirm that Home Depot does NOT cut any free wood for you, it is a business like any other.

Herein, how much does wood cost at Menards?

$30-$60. If you’re looking for something cheaper, you can get a small 3/4 inch by 3 inch piece of plywood for around $30. But if you need anything larger, just go for it – in fact, it’s about the only option available.

Where does Menards get their lumber?

About 96% of their lumber products are actually cut in a log shape and packaged on site or just minutes away. That means most of the time the lumber goes out the backdoor with less than a day’s notice if need be. Some of the items are packaged and then warehoused.

What kind of wood is standard 2×4?

The 2×4, 2 x 4, and 2×4 are standard wood timbers used in construction. When selecting a 2×4, 2×4, or 2×4 for your basement, it’s recommended to use hardwood (usually pine or fir). Pine boards are also more expensive than other hardwood options.

Does Menards cut wood for free?

Yes. Menards has very few if any exclusions for cut lumber cut. However, Menards may refuse to cut the wood you are purchasing as long as the lumber is not in the original box or bundle.

What kind of wood is used for deck boards?

Composite deck boards are lighter and have a longer life

How thick is a deck board?

CUTTING A SKIDBOARD. Use the miter saw instead of a circular saw. Set the miter saw to cut a 12-inch radius and cut down each side of the 2×4 to length. Cut the 2×4 to 36 inches long and cut the ends of the board at a 90° angle (Figure 4).

Can you paint pressure treated wood?

Pressure treated wood is not only inherently immune to rot and decay, but with the combination of a clear coat, it prevents mold, mildew, and other fungi from establishing itself. A white or black pressure-treated wood also reduces the appearance of mildew and prevents brown stains.

How much does deck boards cost?

If you don’t have space to plant trees when you first build your deck, you may choose to build your deck off site and then use it as an outdoor room for your home. The cost to build a backyard deck tends to range between $70 and $400, but prices can vary based on the size of the deck, the type of wood used, the quality of the decking and the materials used in the construction.

How much is treated wood?

You get a better price for treated wood when you find a buyer who is willing to pay more money. You also get a better price when you sell your own wood to your neighbor. Here are the prices you receive for each type of treated lumber: Pressure Treated Wood: $.35 to $0.50 per square foot.

Where can I get a piece of wood cut?

Wood has a certain weight, so it will most likely not fit in the router without drilling holes or gluing it together. If it is not too big and you can’t drill it out, you should be able to make it fit in the router. If it is not too big I would try the edge band.

Will Home Depot cut plywood for you?

While it’s normal for home builders and contractors to cut their own wood, there are other good reasons why you should have it cut professionally to. Not only do they be better paid then for DIYers, you save money and time. Home Depot offers a Home Depot Plywood Installation Service.

Does Lowes cut wood for you?

Lowes has an affiliate program that offers a money back rebate to those who are interested in buying and installing lowes products. There is no cost to join the program, you just need to fill out a customer referral form and get your friends and family to purchase products from Lowe’s. The rebate can be up to $50 per item.

How wide are treated deck boards?